|
Single
Spindle Shaper
|
|
Model
No. : 3301
|
Arbor Capacity ---1/2" ,3/4",1",1-1/4",30mm
(1/2"Collet)
Spindle speeds --------------- 7,500 & 10,000 RPM
Spindle travel ------------------ 3" (76.2mm)
Table size / height ------- 29"x23"(735x584mm) / 34"
Table Inserts Opening --------------- 6-3/8"
Fence size ----------------- 13"x3-3/4"(330x95mm)
Motor -------------- 3 HP, Reversible , Single phase.
Net / Gross Weight -------------- 165 / 195 kgs / 22cuft
Sliding table size / weight -21/2"x10"(546x254mm)/44kgs
|
 |
|
|
Model
No. : 3302
|
Arbor Capacity ------------------
1/2" ,3/4" (1/4",1/2" Collet)
Spindle Speeds --------------- 7,000 and 10,000RPM
Spindle travel ---------------------- 3", lockable
Table size / height ------------- 20"x18" / 33-1/2"
Table opening sizes ------------ 1-3/4",3-1/2" ,5"
Maximum cutter heigjt ------------- 2-3/4"
Motor ------------------ 1 hp , Reversible , Single phase
Net / Gross weight -------------110/130kgs/12.8 cuft
|
 |
|
|
Model
No. : 3303
|
Arbor Capacity ---------- 1/2" ,3/4",1"
(1/4",1/2"Collet )
Spindle speeds ------- 7,000 and 10,000 R.P.M
Spindle Travel -------------- 3" Lockable
Table size / height --------- 20"x30" / 34"
Table opening size ------1-3/8",3",4-1/4" ,5-3/8"
Maximum cutter height----------2-3/4"
Motor --------------- 3 hp reversible, single phase
Net / Gross weight ------ 150/180kgs/20.3cuft
Model 3304 -----3303 with built in Sliding Table
|
 |
|
|
Model
No. : 3305
|
Arbor Capacity -----1/2",3/4",1",30
mm(1/4",1/2"Collet)
Spindle speeds ------------------- 8,000 & 10,000 RPM
Spindle travel ------------------------- 3" (76.2mm)
Table size / height ------ 25"x21-3/4"(635x550mm)/ 33"
Table Inserts--OD=6-1/4",ID=3-1/4",OD=3" ,ID=1-13/16"
Fence size ------------------- 11-1/4"x3"(285x76mm)
Dust Chute opening ------------------- 5-5/8"x2-1/8"
Motor ----------------------- 2 HP, Reversible , Single phase
Net / Gross Weight ---------------- 130/180 kgs / 17.8cuft
|
 |
|
|
Model
No. : 3306
|
Arbor Capacity --------------- 1/2"
,3/4",1",1-1/4",30mm
Collet size-------------------------------------- 1/4",1/2",5/8"
Spindle speeds --------------------- 7,500 & 10,000 RPM
Spindle travel ----------------------------------- 3" (76.2mm)
Table size / height ---------- 30"x28" (750x710mm) / 34"
Table Inserts Opening ---------------------------- 6-3/8"
Fence size --------------------------- 13"x3-3/4"(330x95mm)
Motor -------- 3 HP, Single phase /5HP,3phase. Reversible
Net / Gross Weight /Measure-------- 205 / 250 kgs / 30cuft
Sliding table size/ weight -21/2"x10"(546x254mm)/44kgs
|
 |
|
